• Mass Analyzer: Quadrupole Time Of Flight (QTOF)
• Ionisation Sources: ESI, APCI, APPI , ASAP
• Detector: Electron multiplier
• Mass accuracy within 1 ppm; m/z (z=1) less than 500
• MS/MS accuracy within 2 ppm
• S/N ratio of 450:1
• Resolution of 42,000 at m/z 2722
• High Femtogram level sensitivity, I pg at m/z 609
• Dynamic range of up to five orders
• Ability to scan multiple precursor ions ~50
• Rapid polarity switching of 1.5 sec
• Scan rates of 50 Hz
• Positive and negative ion modes

• Mass Analyzer: Quadrupole Time Of Flight (QTOF)
• Ionisation Sources: ESI, APCI, APPI , ASAP
• Detector: Electron multiplier
• Mass accuracy within 1 ppm; m/z (z=1) less than 500
• MS/MS accuracy within 2 ppm
• S/N ratio of 450:1
• Resolution of 42,000 at m/z 2722
• High Femtogram level sensitivity, I pg at m/z 609
• Dynamic range of up to five orders
• Ability to scan multiple precursor ions ~50
• Rapid polarity switching of 1.5 sec
• Scan rates of 50 Hz
• Positive and negative ion modes

• G4225A 1260 HiP Degasser
• G1376A 1260 Cap Pump

• Flow rate between 0.01 to 20.0 μl per min

• Pressure range 20 to 400 bar (5880 psi) system pressure

• Recommended pH range 1.0 – 8.5, solvents with pH < 2.3 should not contain acids which attack stainless steel. Upper pH range is limited by fused silica capillaries.

•  G4446A 1260 Nano Flow pump

• Flow rate between 0.01 to 4.0 μl per min

• Pressure range 20 – 400 bar (5880 psi) system pressure

• Flow Precision :< 0.2 % RSD.

• G1330B 1290 Thermostat

• Temperature range Settable from 4 °C to 40 °C in 1 ° increments

• G1377A 1260 HiP MicroALS

• Sample capacity 2 mL vials in 2 x 54 vial plate

• Injection range 0.01 – 8 µL in 0.01 µL increments

• Pressure range Up to 400 bar (5880 psi)

• Flow range 0.05 – 5.0 mL/min

• Flow precision< 0.07% RSD

• Pressure operating range 600 bar

• Gradient formation High-pressure binary mixing

• Autosampler capacity 100 vials Injection volume of 0.1‐100 µl in 0.1µl increments

• pH range 1.0‐12.5

• Microfluidic chip-based technology specifically designed for nanospray LC/MS.

• Ambient operating temperature 5 – 40 °C

• orthogonal dual electrode nanospray ion source

• Integrated camera and light source directly in spray chamber.

• Video output to external monochrome monitor for spray visualization

7890 GC

• Split / Splitless capillary inlet: Split ratio of up to 7,500:1

• Column oven operating temperature range + 4 to 450°C

• Temperature set point resolution 0.1°C

• Supports 20 oven ramps

• Maximum achievable temperature ramp of 120°C/min

5977B MSD

• EI source

• Ion source temperature 150–350 °C

• Quadrupole temperature 106–200 °C

• Mass Filter Heated monolithic hyperbolic quadrupole

• Mass range 1.6–1,050 u

• Scan speed up to 20,000

• Mass accuracy 1-μL injection of a 100 pg/μL OFN1 standard at m/z 271.987 ± 0.0052

• Mass axis stability better than 0.10 u/48 hours

• Detector Triple-Axis Detector with high energy dynode and long life electron multiplier

• Software GC/MSD MassHunter Acquisition

• Spectral Library NIST 2017

• Sample handling 12 vial capacity

• Single position, solid aluminum vial oven

• Chromatographic performance <1.5% RSD

• Oven Off, 35 °C to 210 °C

• Valve and Loop Off, 35 °C to 210 °C

• Transfer Line Off, 35 °C to 250 °C